RP35000
Description
Model N/A
Quantity 1
Color Black
Material PCB
Features Working voltage: 5V, wavelength: 650nm
Application Arduino DIY part
650nm Laser Diode Module for Arduino (Works with Official Arduino Boards)
Carbon Monoxide Gas Sensor MQ-7
MQ-7 Rp65000
MQ-7 CO sensor module; gas sensor For Arduino
A working voltage: 5 V DC
B, features:
1, with the directions of the signal output.
2, two-way signal output (analog output, and TTL level output)
3, TTL output valid signal is low. (When low output signal light, and can be connected directly to the microcontroller)
4, 0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage.
5, having a high sensitivity and good selectivity to carbon monoxide.
6, has a long life and reliable stability
C, the application:
Carbon monoxide detection device for home environment. Suitable for the detection of carbon monoxide, gas, etc..
High quality UNO R3 MEGA328P ATMEGA16U2 + USB Cable
RP135.000
Product Details:
UNO R3 board is our new product! It's 100% compatible with original Arduino, now it has perfect quality and performance , we believe it will provide exciting use experience to you!
Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
This is the new Tosduino Uno R3. In addition to all the features of the previous board, the Uno R3 now uses an ATmega16U2 instead of the ATmega8U2 chip. This allows for faster transfer rates, no drivers needed for Linux or Mac (inf file for Windows is needed), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
Note: The TOSduino Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine.
Package included:
1. 1xUNO R3 MEGA328P ATMEGA16U2 board
2. 1x USB cable
LM35DZ
 | LM35DZ RP15000 |
LM35DZ TEMPERATURE SENSOR IC
DATASHEET: http://www.biltek.tubitak.gov.tr/gelisim/elektronik/dosyalar/5/LM35.pdf
DS18B20
 | DS18B20 RP20000 |
DS18B20 DIGITAL TEMPERATURE SENSOR
DATASHEET: http://datasheets.maximintegrated.com/en/ds/DS18B20.pdf
CD4013BM,CD4052BT,PC74HC4046AT
 | CD4013BM SOP-14 RP8000 |
 | CD4052BT SOP-16 RP5000 |
 | PC74HC4046AT SOP-16 RP10000 |
AIRPAX SERIES 6700 THERMOSTAT
 | 67L060 RP25000 |
 | 67L065 RP25000 |
 | 67L070 RP25000 |
 | 67L075 RP25000 |
 | 67L080 RP25000 |
 | 67L085 RP25000 |
 | 67L090 RP25000 |
 | 67L095 RP25000 |
 | 67L100 RP25000 |
 | 67L105 RP25000 |
 | 67L110 RP25000 |
DATASHEET : http://akizukidenshi.com/download/67f120.pdf
ESR METER
ESR METER Rp.225.000
Fungsi
RESISTOR: 0.01 OHM – 50M OHM
CAPACITOR: 25pf – 100.000uF
TRANSISTOR,MOSFET,JFET,IGBT
DIODE
INDUKTAN
Auto off
ESR METER berguna untuk mengukur/mengetes komponen
seperti Transistor,Mosfet,Diode,Lilitan/Induktor,Resistor,Capacitor
Bukan berfungsi sebagai voltmeter atau ampere meter.
MICROPHONES TAKSTAR
 | TAKSTAR E-340 RP200.000 TRANDUCER PRINCIPLE: DINAMIC DIRECTIVITY CHARACTERISTIC: DYNAMIC FREQUENCY RESPONSE: 70Hz-12.5KHz SENSITIVITY: –54dB +/- 3dB(0dB=1V/Pa at 1KHz) OUT PUT IMPEDENCE: 500 ohm +- 30% |
 | TAKSTAR E-350 RP200.000 TRANDUCER PRINCIPLE: DINAMIC DIRECTIVITY CHARACTERISTIC: DYNAMIC FREQUENCY RESPONSE: 80Hz-15KHz SENSITIVITY: –54dB +/- 3dB(0dB=1V/Pa at 1KHz) OUT PUT IMPEDENCE: 500 ohm +- 30% |
 | TAKSTAR PRO-38 RP300.000 TRANDUCER PRINCIPLE: DINAMIC DIRECTIVITY CHARACTERISTIC: DYNAMIC FREQUENCY RESPONSE: 60Hz-16KHz SENSITIVITY: –54dB +/- 3dB(0dB=1V/Pa at 1KHz) OUT PUT IMPEDENCE: 600 ohm +- 30% |
 | TAKSTAR PRO-42 RP300.000 TRANDUCER PRINCIPLE: DINAMIC DIRECTIVITY CHARACTERISTIC: DYNAMIC FREQUENCY RESPONSE: 80Hz-16KHz SENSITIVITY: –54dB +/- 3dB(0dB=1V/Pa at 1KHz) OUT PUT IMPEDENCE: 500 ohm +- 30% |
33KA5 IC REG.3.3V
BD33KA5 Rp25000
DATA SHEET: http://rohmfs.rohm.com/en/products/databook/datasheet/ic/power/linear_regulator/bdxxka5-e.pdf
HC SR501 Adjust Infrared IR PIR Motion Sensor Detector / Sensor Gerak HC SR501
HC SR501 Rp20000
Product Description
1. Working voltage: DC5V to 20V2. static power consumption: 65
3. output level: high 3.3V, low 0V
4. delay time: adjustable (0.3 sec ~18 sec)
5. the embargo time: 0.2 seconds
6. trigger mode: l not repeatable, h can be repeated, the default value for h
7. induction range: less than 120 degree cone angle, up to 7 meters
8. working temperature:- -15~+70
9.PCB dimensions: 32*24mm, screw hole 28mm, screw diameter 2mm, induction of lens dimensions: (diameter): 23mm (default)
Features:
1. automatic: when someone enters the sensing range is input high level, people leaving the induction range is automatically delayed closing high level. Output low level.
2. light control (optional): module to set aside a location, you can set the photo control, or strong light during the day without induction. Light control is an optional feature, factory photoresistance is not installed. If you want, please purchase the photoresistance installed.
3. two trigger modes: l not repeatable, h can be repeated. Jumper option defaults to h.
A. not repeatable trigger mode: after the sensor output high level, delay time is over, the output will automatically change from high to low level.
B. can repeat triggered way: that induction output high level Hou, in delay time paragraph within, if has human in its induction range within activities, its output will has been maintained high level, until people left Hou only delay will high level becomes low level (induction module detection to human of each times activities Hou will automatically extended a delay time paragraph, and to finally once activities of time for delay time of starting points).
4. induction blackout time (default setting: 0.2 sec): after each induction the induction module output (high level low level), you can immediately set a blackout time, during this time the sensor does not receive any sensor signal. This feature can be achieved (sensor output and blockade times) the interval between work, can be applied to interval detection products; at the same time this function can inhibit various disturbances load in the process of switching.
5. wide operating voltage range: default voltage DC5V to 20V
6. power consumption: quiescent current 65, particularly suitable for battery-powered appliances.
7. high level signal output: can be easily docked with the circuit.
1: power supply
2: high and low level output
3 power negative
H: repeatable triggers
L: not repeatable triggers
CDS: Photo control
Instructions for use:
1. the induction module powers on for about one minute after initialization, this module can output interval during 0-3 time, one minute after entering standby.
2. direct sunlight should be avoided as far as possible sources of interference, such as lighting close range module surface of the lens, so as not to introduce interference signals malfunction; using the environment as far as possible to avoid movement of the wind, the wind will cause interference to the sensor.
3. induction module used double Yuan probe, probe of window for rectangular, double Yuan (a, Yuan b Yuan) is located in more long direction of ends, dang human from left to right or from right to left walked Shi, infrared spectrum reaches double Yuan of time, and distance has poor value, poor value more large, induction more sensitive, dang human from positive to probe or from Shang to Xia or from Xia to above to walked Shi, double Yuan detection does not to infrared spectrum distance of changes, no poor value, therefore induction does not sensitive or does not work ; So when the sensor is installed should probe the dual directions and the directions of human activities up to parallel as far as possible, ensure human passes has dual induction by probes. In order to increase the sensing angle, this module uses the circle lenses, also make probes sensors on all sides, but in both directions up and down left and right side is still strong induction range, sensitivity, must still be installed as far as possible according to the above requirements.
Ultrasonic Ranging Module SR-04
Ultrasonic Ranging Module Ultrasound Wave Detector Rp50000
Product Description
Voltage: DC5V;
Static current: Less than 2mA;
Output signal: Electric frequency signal, high level 5V, low level 0V;
Sensor angle: Not more than 15 degrees;
Detection distance: 2cm-450cm
High precision: Up to 0.3cm
PCB size: 4.5 * 2.0 CM
Parameter:
Center resonant frequency: 40kHz ±2kHz
Static capacitance: 3300P ± 300P
Resonant impedance: 120Ω±20Ω
Frequency bandwidth (-3dB): Δf-3dB ≥ 2kHz
Operation voltage: 300 ~ 500VP-P
Limit voltage ≤ 1000VP-P
Transmitting beam angle: 6O degrees
Operation temperature: -40 ~ +80 °c
Protection class: IP65
(1) the IO trigger ranging, to at least 10 us high level signal;
(2) module automatically send eight 40 KHZ of square wave, automatic testing if it has any signals return;
(3) a signal to return to, through the IO output top level, the high level of the last time is
From the launch ultrasonic returned to time. Test distance = (high level time * sound velocity (340 M/S)) / 2;
This module can be to provide a full range of ranging procedure: C51, PIC18F877, ultrasonic LCD1602 showed that ultrasonic LCD12864 display, digital pipe display, serial ports display, ranging reference program.
STC Minimum System Board
STC Minimum System Board Rp25.000
Information
1) 40 pins all leads
2) Classic 51 minimum system, don’t welding
3) 11.0592M crystal
4) support chips: STC89C52, STC12C5A60S2, STC11/10x series, AT89S52 and the pins and the chip compatible chip
5) a power switch, convenient experiment.
6) DC-005 power socket (supporting the transposon 5.5*2.1)
7) outside extended 2 Road VCC, GND
8) board size: 6.5*3.1 cm
HGTP3N60A4
 | HGTP3N60A4 Rp35000 |
http://datasheet.octopart.com/HGTP3N60A4-Fairchild-datasheet-66020.pdf
600V, SMPS Series N-Channel IGBT
The HGTD3N60A4S and the HGTP3N60A4 are MOS gated
high voltage switching devices combining the best features
of MOSFETs and bipolar transistors. These devices have the
high input impedance of a MOSFET and the low on-state
conduction loss of a bipolar transistor. The much lower on-
state voltage drop varies only moderately between 25 o C and 150 o C.
This IGBT is ideal for many high voltage switching
applications operating at high frequencies where low
conduction losses are essential.
This device has been
optimized for high frequency switch mode power
supplies
.
Subscribe to:
Posts
(
Atom
)